Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

Knowledge
Home > Knowledge > Content
Eight position and reason of quartz stone easy to crack
May 31, 2018

blob.png

In the selection of quartz stone countertops Many consumers are blinded by the price of the eyes, that the quality of quartz stone and the relationship between the price is not big.   

It's good to be able to use it. In fact, a penny a penny, high-grade and low-grade inferior quality difference is very far. So consumers in the selection of quartz stone countertops, we suggest that we still choose high-grade, the size of the quartz stone manufacturers production products.

The quality of quartz stone itself is on the one hand, in processing, installation process, if there is Jerry, the process is not rigorous and so on, the latter is likely to appear cracking. For example, here are several:

1,the table joint seam cracking: the main installation workers in the collage, the seam is not aligned, open into the trumpet above small, glue is not coated even more important is not to apply the glue after the use of the F-clamp fixed, or in the glue to add curing or to promote the relief of the more brittle in the use of the process by a slight impact is cracking;

2,Crack around the corner: The wall is too tight not to leave contraction seam, two cabinets between the rough or not cushion flat, the front corner open into a right angle open into the internal stress concentration, by external shocks or temperature changes table shrinkage uneven and cracking;

3,On the stage of the basin surrounding cracking: no gap between the basin and the basin hole, the basin hole is not polished smooth, the corner of the basin is not grinding round or leave a sawtooth, by external impact or temperature changes in the table shrinkage uneven and cracking;

4,Furnace hole surrounding cracking: gas stove and the gap between the furnace hole not to leave, the furnace hole is not polished smooth, the corner of the basin hole is not grinding round or leave the sawtooth printing, by external impact or temperature changes table shrinkage uneven and cracking;

5,Stage basin, furnace hole front skirt crack: cabinet counter or stove cabinet burden flat, when the stage basin, furnace hole front skirt by gravity (people trample, tread, etc.) caused on the platform basin, furnace hole front skirt cracking;

6,After retaining water cracking: the cabinet is uneven or the pad is not flat;

7,After blocking the edge of the surface of the table cracking: glue adhesion is not strong;

8,The center of the table cracking, such as: by the high temperature, under the impact of external forces, cabinets or plate uneven, plate has internal injuries, etc., the main factor that causes the mesa cracking is the quality control of the mesa in the process.

  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.