Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

Knowledge
Home > Knowledge > Content
Factors affecting the efficiency of cutting machine
Dec 23, 2017

Cutting machine is one of the common construction machinery, for machinery, we are most concerned about is undoubtedly the quality and efficiency.

The power of cutting machine is one of the important factors affecting the quality of cutting. The larger the power of cutting machine, the thicker the thickness of the sheet can be cut. In the same thickness, cutting stainless steel and aluminum and other non-ferrous metals than cutting carbon steel required laser power is much greater. However, with the increase of laser power, the slit width and heat affected zone will increase.

With the increase of laser power, the cutting speed and the cutting plate thickness are increased. If the low carbon steel plate thickness increases, the larger diameter nozzle and lower oxygen pressure should be used to prevent the burn of the incision edge. The aluminum plate has a strong reflective effect on the laser and high thermal conductivity, which is harder to cut than mild steel and stainless steel. Compared with the cutting low carbon steel, under the same laser power, the cutting speed and the cutting plate thickness of the cutting aluminum alloy are lower.


  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.