Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

Knowledge
Home > Knowledge > Content
How to process ultra-thin stone
Jun 02, 2018

With the extensive use of ultra-thin stone now, people's demand for ultra-thin stone is increasing, and the processing method of ultra-thin stone has come into people's sight. Ultra-thin stone after technology processing, it can be more flexible to use in a variety of decoration buildings. Today and together to see how ultra-thin stone is processed.

1, preparation before processing. Ultra-thin stone processing is generally used in the frame saw and diamond disc saw processing, and the use of these two methods of processing, it will produce a larger flatness and thickness of the error. Therefore, before processing, we must first undergo a fixed thickness, polishing and other treatment. After cutting it into the required specifications, it will be able to make ultra-thin stone for the profile processing.

2, processing equipment selection. According to different processing requirements, the choice of processing equipment is also different. For example, for the ultra-thin marble stone processing, the general selection of diamond Band saw processing equipment, which can be carved into various types of marble plate, and cut the thickness of the thinnest up to 2mm. But the processing of granite ultra-thin stone can not choose diamond Band saw processing equipment, which is usually a single chip diamond circular saw.

3, thickness calculation. After selecting the suitable processing equipment according to the specification of ultra-thin stone, the cutting width of the cut should be measured first. Then according to the requirements of the selected thickness of the engineering board, calculated the thickness of the cut plate.

4,After the thickness of ultra-thin stone calculation, you can use ultra-thin stone in the processing equipment for processing.2.png

Processing method of ultra-thin stone

(1) Three-dimensional type of special-shaped stone processing, special-shaped stone processing mainly refers to stone products, door and window sets, vases and other processing, its processing methods are mainly splitting, chopping, grinding, shovel, chisel, drilling, and so on, you can use manual processing, there are available mechanical processing.

(2) plane profiled stone. such as kitchen cabinets, desktop, etc., its processing methods are mainly through cutting, grinding, polishing and other means to produce.

(3) Surface plate processing. such as the current cylinder, ARC plate processing is a curved plate processing, the main processing mode is to use machine equipment to process.

  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.