Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

Knowledge
Home > Knowledge > Content
How to skillfully replace the cutting blade with tile cutting machine
Dec 23, 2017

Ceramic tile cutting Machine in the current market is very good, ceramic tile cutting machine tile use of supplies (cutting blade) is very important, but many people do not know how to replace, how to skillfully replace the cutting blade?

1. Choose the same type of cutting blades, according to different types of cutting blades can be in the ceramic tile cutting machine configuration to determine.

2. When installing the cutting blades, the brick mouth is required to be flat with the horizontal line, which can prolong the service life of the cutting blades and improve the finished product of the tiles.

3. After the installation of cutting blades to test how the effect of cutting, with discarded tiles into the cutting surface on the precise size of the tiles to adjust to see whether the effect of cutting to meet the standard.

4. Turning the cutting machine, the clamping nut rotation direction and saw blade rotation direction is the same as removing the nut, on the contrary is the nut clamp saw blade.

5. Remove the saw blade, the cutting saw itself marked with a saw blade rotation direction, the screw thread of the fixed saw blade is opposite to the saw blade rotation, so that the bolt has the tendency to tighten with the rotation when the saw blade rotates, the blade is fixed with a wrench in the removable saw blade, and then the direction is indicated by the arrow of the cutting saw itself. Rotate the top nut to remove the saw blade.

6. Ceramic tile cutting machine saw blade installation must be noted that the saw blade marked with the direction of the arrow must be the same as the direction of the saw blade housing arrows.

7. When the part is removed, the parts are marked and recorded in the order they are removed.

8. Put on a new saw blade.

9. To reset the parts in reverse order and mark.

10. Tighten the fixing nut.

11. Test run check blade rotation is smooth. Smooth to complete the work of the saw blade.


  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.