Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

Knowledge
Home > Knowledge > Content
Instructions for the use of cutting machine
Dec 22, 2017

1. After the installation of the cutting machine, the power to check the whole parts of the rotation is flexible, the fasteners are loose.

2. Turn on the power and press the host button to see if the blade is in the same direction as the arrow. If the reverse is adjusted immediately. After inspection can be loaded with rock samples for cutting, rock sample clamping, should choose a reliable clamping point, to prevent the virtual folder and False clip phenomenon. So as to avoid damage to the cutting tools and rock samples due to rock movement during cutting.

3. When holding irregular rock, it can be clamped by jacking method.

4. Cutting core samples, such as the number of rocks, can be randomly attached to a long plate pressure on several pieces of rock samples, cutting together to improve work efficiency.

5. Work, first start the main motor, and then press into the button, start cutting, as the rock more irregular shape, at this time the speed of the knife to the blade to all into the rock sample, can be a little faster.

6. Cutting machine automatic retreat knife, when the cutter along the table movement to the terminal, can automatically back to the beginning, and automatically stop moving. If you need to step back during work, press the console rewind button. In the back of the need to advance, press the button can also enter the knife. No matter in the knife or retract, press the stop button to cut the knife can stop moving. Work, such as the discovery of cutting knife away from the Rock sample, you can press the Fast Forward button (press and hold) or move fast forward, to the blade close to the rock sample, that is, release the button. Then press the push button to perform normal cutting. This can shorten the feed time.

7. When cutting the specimen, the feeding speed can be adjusted according to the hardness of rock before working.


  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.