Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

Knowledge
Home > Knowledge > Content
laser bridge saw machine for stone
Jun 14, 2018

Chinese tile specifications revolutionary history- 1


The history of the development of the ceramic industry in China is largely the same as the history of the evolution of the ceramic tile specifications. At the time of the construction industry and the development of ceramic machinery and equipment technology, the mainstream specifications of domestic ceramic products were limited to 200×200 mm for a long time due to technical limitations. 300 × 300mm and other small specifications. Until the turn of the century, domestic large-tonnage presses turned out and the domestic ceramic tile specifications gradually broke the bottleneck and became “big”. Later, under the strong support of equipment technology, large-scale products such as 600×600mm and 800×800mm were launched one after another, occupying the mainstream market for more than ten years. Today, with the domestic oversized tonnage press constantly conquering the technical difficulties, the largest specifications of ceramic tiles have also been continuously refreshed, promoting the "large-scale era" to come.


640.jpg

Small size era


“Before the advent of color glazed tiles, the most common product in China’s tile and tile industry was a small-size glazed interior wall tile. This type of interior wall tile is based on pure white, and its specifications are mostly 152×152mm and 108×108mm.” This is Bao Jie. Dr. Jun wrote a text in the book “Chinese Wisdom”.


In the 1970s and 1980s of the last century, the level of domestic economic development and people’s living standards were still relatively low. Most ordinary people were still on the edge of subsistence lines and lacked sufficient economic strength to consume ceramic tiles as “luxury goods”. . Under the limited market demand, small size internal wall tiles of 152×152mm and 108×108mm have continued to be the leading products in the market for many years.


At that time, the roller kiln was not widely used. China's ceramic companies mostly used ordinary tunnel kiln to produce tiles and put the tiles in the kiln. This process has a big drawback, that is, the fired tiles are easily deformed. The largest specification is only Can do 100×200mm.


  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.