Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

Knowledge
Home > Knowledge > Content
Quartz stone kitchen countertops installation details should pay attention!
May 11, 2018

Quartz stone is the preferred material for kitchen countertops. Therefore, the installation of quartz stone kitchen countertops has become a very important part of quartz stone countertops. If the installation is not good, it will directly affect the service life of the kitchen countertops. Incorrect installation will also Affecting the appearance of the countertops may even lead to cracking of the countertops. This series of problems will have a great impact on sales. Therefore, in order to ensure the installation quality of the countertop, you need to pay attention to the following points before installation:


1. When splicing the design plane, the most important thing to notice is the physical properties of the quartz stone to avoid the consequences of seam cracking due to thermal expansion, contraction, or stress concentration. When selecting the connection position, the force acting on the plate must be fully considered. . Avoid connecting at the corner or mouth of the furnace.

 

2. When designing the corner of the countertop, stress concentration should be fully considered, resulting in cracking at the corners of the countertop. Therefore, arc angles with a radius of 2.5 cm or more should be maintained at all corners during processing.

 

3. When designing the opening position of the cooktop, the position of the opening of the countertop shall be greater than or equal to 8 cm from the edge of the tabletop to prevent cracking of the face of the table. When opening the entrance of the stove, first open the hole with a cutting machine or a jig saw, and then Trimming with edger or hand-grinding machine to achieve a smooth effect. The radius of the four corners is basically uniform. As the sawing and cutting machine cut holes, the saw-toothed edges of the cut hole are printed to the extent that they have cracks. It is easy to cause openings. Cracking at the place.

 

4. The corners at the opening shall be rounded with a radius of 2.5 cm or more, and the four corners must be reinforced with a homogenous sheet plate. There must be a certain space between the cooktop and the tabletop, and the space distance is 0.4-0.6 cm. Put insulation cloth and tin-platinum paper as insulation protection measures around the hole.

 

5. When designing a countertop, consideration shall be given to the restrictions on the dimensions of the countertops by the passages of stairs, elevators, doors, etc. The on-site joints shall comply with the aforementioned requirements for joints.


  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.