Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

Knowledge
Home > Knowledge > Content
Requirements for installation and application of Saw blades
Dec 23, 2017

Installation Requirements

Equipment in good condition, spindle without deformation, no diameter jump, installation fixed firmly, no vibration and so on.

Check whether the saw blade is damaged, the tooth shape is complete, the saw plate is smooth and smooth, and there are other abnormal phenomena to ensure the use of safety.

When assembling, make sure that the blade arrow direction is the same as the rotation direction of the equipment spindle.

Saw blade installation to maintain the axis, chuck and flange cleaning, flange diameter and saw blade inside the same diameter, to ensure that the flange and saw blade closely combined to fit the positioning pins, tighten the nut. Flange size should be appropriate, the outside diameter should not be less than 1/3 of the diameter of the saw blade.

Equipment before starting, to ensure the safety of the case, there is a single operation equipment, the point of idling, check whether the equipment turned correct, there is no vibration, saw blade installed after idling for a few minutes, without slipping, swinging or beating normal work.

Usage requirements

When working, the workpiece should ensure that it is fixed, the profile orientation to eat knife direction, so as to avoid abnormal cut, do not exert lateral pressure or curve cutting, the knife to smooth, to avoid the impact of blade contact workpiece, resulting in the blade breakage, or the workpiece flying out, accidents occurred.

When working, the discovery of sound and vibration abnormalities, rough cutting surface, or produce peculiar smell, must immediately terminate the operation, timely inspection, troubleshooting to avoid accidents.

In the beginning of cutting and stop cutting, do not enter the knife too fast, to avoid breakage teeth broken.

If cutting aluminum alloy or other metals, use a dedicated coolant lubrication to prevent the blade overheating, produce paste teeth, and other damage, affecting the quality of cutting.

Equipment to ensure the flow of cuttings and slag suction device to prevent accumulation of slag into blocks, affecting production and safety.

  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.