Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

Knowledge
Home > Knowledge > Content
Safety rules for edging machines
Dec 22, 2017

1. Check equipment before commencement, must be in normal condition.

2. The operator must wear gloves and masks or dust-proof appliances. Work area doors and windows should be closed to avoid silica dust outside. The ventilating and dedusting device must be in good working condition.

3. Pre-work Check considerations:

(1) The grinding wheel tightening nut must not be loose phenomenon;

(2) The grinding wheel shall not have a crack gap;

(3) The safety cover is fully assembled and reliable;

(4) Before and after, the upper and lower drive handle flexible operation, no noise when running.

4. Plate grinding edge should be strictly controlled to adjust the size of the grinding wheel, the amount of grinding should not be too large, so as to avoid the plate grinding and grinding wheel rupture.

5. When the grinding plate failure, such as steel card die, should immediately close the total switch, after the car will be removed.

6. At any time in production to check the motor has no fever and abnormal operation.

7. Stacking steel plate (especially cold rolled plate and oil plate) pay attention to neat, not askew, no more than 1. 2 meters and collide with each other so as not to slip and hurt people.

8. Feed and transfer steel plate to hold steady, put, not to throw, so as not to hurt people.

9. When the ventilating and dedusting device fails, it shall stop working or take measures.

10. Work finished, turn off the switch, do a good job cleaning.

  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.