Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

News
Home > News > Content
Brief Introduction Of Infrared Cutting Machine
Dec 22, 2017

Infrared cutting machine also known as Infrared bridge cutting machine, mainly used for stone infrared cutting, CNC infrared cutting, infrared glass cutting, infra-red plastic cutting, will roughly cut the polished after the wool board, plastic, glass, cement, etc., according to the requirements of fast and accurate, continuous cutting required standard specification plate.

Use Range

1. Stone Products (marble, granite)

3. Cement Products

4. Asbestos Products

5. Craft Products

6. Other Building materials

Operation Instructions

(i) Preparation before commissioning

1. For the entire external connection, fasteners, a comprehensive check to confirm that the connection is fastened well;

2. The Reducer, spindle box, rotating parts, moving parts must be in accordance with the provisions of the injection of lubricating oil;

(ii) Electricity inspection

1. Connect the Power

2. Check the lights are normal;

3. Check the emergency stop button is reliable and effective.

Precautions

1. The maintenance of electrical parts, should be the corresponding qualification of electrical maintenance personnel overhaul, prohibited Shing open the electronic control box, in order to avoid danger or caused by electrical control part of the damage;

2. The applicable manufacturer guarantees the power supply voltage stability, the boundary is reliable;

3. Power supply line, should be installed circuit breaker, maintenance should be cut off power supply, in order to avoid the danger of electric shock;

4. When the machine is used, it should cut off the total power of the machine for safety.

5. The Electric control box and the hydraulic station part of the machine set should do the corresponding waterproof measure, must not drench to the water, lest causes the electric control partial damage.


  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.