Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

News
Home > News > Content
Daily Maintenance And Repair Of Cutting Machine
Dec 22, 2017

1. Every working day must clean the dirt of the Machine tool and the guide rail, keep the bed clean, turn off the gas source and the power supply at the end of work, and empty the remaining gas in the machine tool.

2. If you leave the machine for a long time, turn off the power to prevent the non-professional operation.

3. Pay attention to observe machine horizontal, longitudinal guide rail and rack surface has no lubricating oil, make it keep lubrication good.

4. Check the total intake of garbage, valves and pressure gauges are working properly.

5. Check all trachea connectors are loose, all tubes with no breakage. Fastening or replacing if necessary.

6. Check all transmission parts are loose, check gear and rack meshing situation, when necessary to adjust.

7. Loosen and tighten the device, push the pulley with the hand, whether to come and go freely, if there is abnormal situation in time adjustment or replacement.

8. Check the clamping block, steel belt and guide wheel has no loose, steel belt tightness, if necessary adjustment.

9. Check all buttons and select switch performance, damage replacement, and finally draw a comprehensive testing of the precision of the machine.


  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.