Categories
Contact Us

Linhai Zhengda Machinery Co.,Ltd
Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
Contact: Kevin
Tel: +86-576-85889981
Mob: +8613666497878
E-mail: zhengda@cnzdkj.com

News
Home > News > Content
Some Skills To Judge The Quality Of Tile Cutting Machine
Dec 23, 2017

At present, the market of ceramic tile cutting machine brand fish mesh mixed, the difference in quality is very large, distinguish between good and bad, the brand is actually secondary, many people in the purchase of ceramic tile cutting machine, often more blind, I do not know how to judge the quality of ceramic tile cutting machine, sometimes ignore the more important quality standards.

Here are some tips for judging the quality of tile cutting machines:

1. To inspect the material and workmanship of the machine.

2. Test machine cutting, listen to the sound, see the effect of cutting straight.

3. See if the motor is a new copper-cored wire motor.

4. See if the cutting platform is straight.

5. Check the rails for deformation

6. See whether the blade of ceramic tile cutter has burr, the incision is burn, whether the incision is flat, the life of the single chip.

7. If the effect of cutting can reach the quality requirements of the product, then the quality of the cutting piece is very important.

For ceramic tile cutting process, the evaluation of its processing quality mainly includes the following principles:

1. Cut smooth, no stripes, no brittle fracture.

2. Narrow slit width, which is mainly related to the size of the cutting blade spot diameter, cutting width determines the minimum of the outline, when the thickness of the stone increases, cutting width also increases. So want to ensure that the same high-precision, regardless of the width of the incision, workpiece in the ceramic tile cutting machine processing area should be constant.

3. The slit is perpendicular, heat affected zone small; In general, ceramic tile cutting machine mainly concentrated in the following 5MM materials processing, the cross-section of the vertical may not be the most important assessment factors, but for the ceramic tile cutting, when the processing material thickness of more than 10mm, cutting edge of the vertical is very important.

4. The surface roughness of the cutting surface is the key to measure the quality of the tile.

  • Newsletter
  • Categories
  • Contact Us

    Linhai Zhengda Machinery Co.,Ltd
    Add: No.261, Hushan South Road, Xiaozhi Town, Linhai City, Zhejiang Province, China
    Contact: Kevin
    Tel: +86-576-85889981
    Mob: +8613666497878
    E-mail: zhengda@cnzdkj.com

  • QR Code
  • Copyright © Linhai Zhengda Machinery Co.,Ltd All Rights Reserved.